PRP Seats
Can-Am Maverick X3 Seat Lowering Bracket
Can-Am Maverick X3 Seat Lowering Bracket
SKU:C54
Couldn't load pickup availability
Many have argued that the Can-Am Maverick X3’s seating angle is a bit too reclined. Sit a bit more upright with PRP’s Can-Am Maverick X3 Seat Lowering Bracket. This kit lowers the front mounting point of the sliding rails by 2” allowing you to get your seating angle just right. The stock Can-Am Maverick X3 slider rails have two mounting points in the front that allows you to adjust your seat into a upper or lower position. PRP’s Seat Lowering Bracket creates a third “extra low” mounting point. Perfect for those who have a low cage, or are installing a large composite seat.
To Install – Unbolt the front of the slider rails from the mounting points. Install each U-Shaped bracket onto the lower mounting point using the supplied hardware and center spacer. Then reinstall the slider rail onto the lowering bracket, re-using the OEM hardware.
- Create more adjustability in your X3 seats
- Great for those who want less seat recline, or have low cages
- Lowers the front of your stock Can-Am X3 sliders 2”
- Includes two brackets, two bolts, two washers, two spacers
- Works with PRP or stock seats
*May not work on 2020+ models with reinforced cage bars that run underneath the seat.
Can-Am Maverick X3 Seat Lowering Bracket includes:
- Two brackets
- Two bolts
- Two washers
- Two spacers
Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Share
![Can-Am Maverick X3 Seat Lowering Bracket](http://pivotalmotorsports.com/cdn/shop/files/X3Lowering1.png?v=1693157825&width=1445)
![Can-Am Maverick X3 Seat Lowering Bracket](http://pivotalmotorsports.com/cdn/shop/files/X3Lowering2.png?v=1693157825&width=1445)
![Can-Am Maverick X3 Seat Lowering Bracket](http://pivotalmotorsports.com/cdn/shop/files/X3Lowering3.png?v=1693157825&width=1445)
![Can-Am Maverick X3 Seat Lowering Bracket](http://pivotalmotorsports.com/cdn/shop/files/X3Lowering4.png?v=1693157825&width=1445)