The most unique Patented Trailer Dolly on the market.

Tow handle comes off to leave a 20" x 24" foot print. Allowing the TRAILER-TUG to be transported in any trunk, back of SUV, or truck to go with you when picking up your trailer. Frame is 1/8" thick cold rolled steel, mig welded, and powder-coated.

Wheels are the strongest wheels on the market.

Casters have proven use on commercial pallet jacks for years. Urethane tire for easy gliding on any hard surface.

You won't have to wrestle with your trailer ever again!

With a newly patented design and lifetime manufacturers warranty with registration.

  • VOTED AS #1

    MOST STABLE TOW DOLLY BY

Trailer Tug Warranty Registration

Click Here For LIFETIME Manufacturers Warranty Registration
*Form must be completed within 30 days of purchase*

Send completed form to sales@trailertug.com
OR
Send following information to sales@trailertug.com:
1. FULL NAME
2. EMAIL
3. ADDRESS
4. WHERE YOU PURCHASED PRODUCT
5. WHEN YOU PURCHASED PRODUCT
6. HOW DID YOU HEAR ABOUT US
  • If product has manufacture defect - DO NOT USE PRODUCT.

  • Contact Trailer Tug soon as possible at 714-369-8066 or sales@trailertug.com and we will send you a new product or the necessary parts.

Trailer-Tug FAQs

Please do not use down a hill towards you. Much like a tiny car, the trailer will overpower the trailer dolly. The brake is meant to keep the dolly from rolling out of it's storage area, not to stop a moving trailer.

15.5" to where the ball sits, 18" to the top of the ball. Ball sold separately.

Yes this dolly works with all ball sizes as long as the shank is 1" in diameter. Ball is sold separately.

We designed this product with the ball sold separately so our customers can have the freedom to use the dolly on various trailers that require different ball sizes. Click here, if you would like to purchase a ball.

It will have no problem going up a slight incline. If you are using it on a decline, we do not recommend trying to stop your trailer with this. It will accept any size ball with a 1" diameter shank.

Yes! You will have no problem moving this. It has a 3,500lb tongue weight.

A trailer with surge brakes cannot be backed up without inserting a pin in the neck of the trailer. When the tow vehicle is in reverse, pushes in on the trailer neck, which would activate the surge brakes. Inserting a pin in the neck of the trailer prevents this from happening while the driver is backing up. If the pin is left in the neck of the trailer, the surge brake will be disabled. The pin must be removed when the vehicle is ready to travel.

Yes, you can use this for a 19 Foot Bass Boat and it will turn VERY EASY with a tandem axle trailer. You will have no issues at all.

Yes! When pushing into the trailer, use the back rubber bumper to keep the weight on the rear wheels and the dolly stable. Do not bring handle towards you while trying to push back.

Right

Wrong

Yes, it does.

Yes! This product is modeled after pallet casters which are responsible for transporting heavy shipments over various terrain. The urethane wheels glide over gravel.

Yes, this unit has a hole that goes straight through. It accepts a shank as long as 3.5".